The waste gas treatment and purification tower is a new kind of gas purification treatment equipment. It is produced on the basis of the floating packing gas purifier, which is widely applied to the pretreatment of industrial waste gas purification and dust removal. The purification effect is very good. How do you correctly choose the exhaust purification tower for the Hongfeng exhaust gas purification tower?

1, structure and material

The structure of the exhaust gas purification tower includes the tower body, and the bottom and the top of the tower are respectively equipped with air inlet and outlet. The tower has a filter layer and a water retaining layer, and the filter layer and the water retaining layer are sequentially arranged in accordance with the bottom-up sequence, and a spray mechanism is above the filter layer.

Hongfeng waste gas purification tower indicates that material selection is also very important. According to the characteristics of each material, it can choose its most suitable exhaust gas purification equipment, and its common material is FRP.

2. The ventilation system of the workshop

The ventilation system includes workshop ventilation area, if there is a pickling bath tank size to be informed, if necessary with the manufacturer technician or engineer phone manufacturers more conducive to the understanding of the situation, even when necessary to allow manufacturers to the scene, in order to design reasonable collocation of the exhaust gas purification tower.

3. Types and concentrations of organic contaminants

When organic waste gases contain high concentrations of convertible organic acids (such as chlorine, fluorine, sulfur and halogen), they must be particularly careful. They can cause serious corrosion to the equipment or poisoning the catalyst. If the concentration of organic waste gas exceeds 25%, special consideration is given to the implementation of measures to prevent the tempering from the oxidizer to the exhaust source.